DE 
EN 
RU 
PT 
JA 
ES 
IT 3PL Fit-Out Economics
3PL Warehouse Fit-Out Capex: Why Mefence Industrial Safety Fence Beats Branded Per-Metre Pricing
For a 3PL operator funding a tenant build-out, fence spend rarely shows up on the revenue line. Mefence factory-direct industrial safety fence runs about $10–32/m, roughly one-fifth of $105–213/m Troax or Axelent quotes, so the same isolation budget covers 3–5× the perimeter for warehouse zoning, AGV lane separation, and machine guarding.
Where the per-metre gap actually comes from
Both Troax, Axelent and Mefence deliver visible, OSHA-friendly area demarcation. The price difference comes from where the steel is bent, welded and painted.
| Line item | Branched European fencing (Troax / Axelent class) | Mefence industrial safety fence |
|---|---|---|
| Typical ex-works price per metre | ~$105–213/m | ~$10–32/m factory-direct |
| Frame design | Framed panel with perimeter tube | Frameless 3D welded wire mesh with T-shaped ridges |
| Panel finish | Powder coated, often imported | Powder-coated Q235 carbon steel, factory-direct |
| Field assembly | Bolted, sometimes site-cut welded | Clip-fixed, on-site cut, no welding |
| Reuse after tenant churn | Often single-use | Dismantle, move, redeploy to next tenant |
Why the fence line gets a second look in a 3PL fit-out
One line-item cost, not three
Each metre of branded fencing typically arrives as a framed panel, a separate post kit, and a separate cap-and-clip hardware pack. Mefence ships the mesh, the post and the base plate as one module. The same plastic clip and self-tapping screw fixings that hold the mesh to the post are the parts the installer uses to bolt the base plate to the slab, so the procurement team buys one BOM instead of three, and the receiving dock checks off one carton per zone.
Bolt-down bases that respect tenant slabs
A tenant build-out has to come out clean when the contract ends. Mefence posts use bolt-down base plates sized for M10/M12 expansion anchors on a typical warehouse slab, with a 140 mm ground clearance so pallets and MHE tyres do not catch the bottom edge. The powder-coated Q235 carbon steel resists forklift scuffs without needing a separate kick-rail option. For 3PLs that re-let the floor every 3–5 years, this means no welded plates to grind off and no surface treatment to repatch at handover.
Re-deploy the same fence to the next tenant
Because the mesh is clip-fixed to the post and not welded, a Mefence run comes apart in the reverse order it went up. Panels that zoned a high-rack pick face this quarter can move to a returns line for the next tenant, and a corner module that framed an AGV charger last quarter can frame a cross-dock door this quarter. The 200–3000 mm panel height range and 200–1400 mm panel width let the same stock cover tenant zones of very different sizes, which is exactly how a multi-tenant 3PL hall consumes its capex.
Where 3PL operators put the saved capex
- Tenant receiving and dispatch zones — fence the cross-dock lanes, leave room for two extra dock doors on the same wall run
- AGV / AMR charging bays — clip-fixed mesh keeps the route visible to overhead cameras and LiDAR
- Pick-face and reserve racking — modular zoning that follows slot moves instead of welded partitions
- Cold-chain and ambient halls — the same fence line moves with the tenant mix without welding
- Returns and value-added service cells — quick disassembly when the line is re-tooled for a new SKU set
In each case, the capex saved on the fence line is what the 3PL can reinvest in automation, dock equipment or tenant incentives, instead of writing off welded frames when the next contract lands.
3PL fit-out cost model
A simple capex worksheet comparing Troax/Axelent-class framed fencing against Mefence frameless 3D industrial safety fence for a typical 5,000–50,000 m² multi-tenant hall, with per-metre, per-zone and per-tenant assumptions built in.
Get a per-square-foot fence quote for your next tenant build-out
Send your floor plan and the zones you need to isolate. We will return a per-metre, per-zone quote for Mefence industrial safety fence within two working days, so you can compare it line-by-line with your current framed-fence quote.
