DE 
EN 
RU 
PT 
JA 
ES 
IT 
Horizontal Lifeline System
A horizontal lifeline system is a safety system that is designed to protect workers who are working at heights or in dangerous areas, such as on roofs, towers, or other high structures. It consists of a horizontal line, typically made of steel or other high-strength materials, that is secured to anchor points at either end. Workers attach themselves to the line using a safety harness and lanyard, allowing them to move freely along the line while remaining connected to the system at all times.
Die horizontal lifeline system is designed to prevent falls and minimize the impact of any falls that do occur. It is an important safety measure for workers who are at risk of falling from heights, and it is used in a variety of industries, including construction, telecommunications, and maintenance.
When using a horizontal lifeline system, it is important to follow all safety procedures and guidelines, including proper installation and maintenance of the system, proper use of personal protective equipment, and regular inspections and testing of the system. Only trained and authorized personnel should use the system, and they should be fully aware of the potential hazards and risks associated with working at heights.
Interlock Switch Mounting Without Drilling: Why Alfence T-Slot Posts End Phantom Stops
Bolting an interlock switch bracket through a powder-coated steel post drills the coating, drops swarf into the cell and leaves a rust line — and when the hinged leaf sags, the tongue misaligns and the PLC reports a phantom guard fault. Alfence mounts sensors, e-stops and conduit in the T-slot groove of a 40×40 mm or 45×45 mm aluminum post, with door hardware sized to keep the safety switch aligned.
Phantom Safe Torque Off Stops: T-Slot Guarding Fence Posts Mount Interlocks Without Drilling
Painted steel guarding posts force maintenance to drill for interlock switches, dropping swarf in the cell and breaking the coating where rust starts. Sagging hinge doors then misalign the interlock tongue and the PLC trips Safe Torque Off while the gate is closed. Alfence industrial safety fence mounts sensors, e-stops and cable routing into the T-slot aluminum profile post without drilling, and uses hinged, folding or sliding door frames that keep interlock geometry stable - protecting OEE through phantom stops and line changes.
Automotive Plant Industrial Safety Fence: Keep the Robot Cell Close to the Hazard
Automotive plants cannot afford to lose production floor to an oversized machine guarding perimeter. Alfence combines 20×100 mm mesh with slim 40×40 mm or 45×45 mm aluminum posts for a compact, reconfigurable industrial safety fence layout, with final clearance confirmed by the project risk assessment.
