IT 
EN 
DE 
RU 
PT 
JA 
ES Protezione delle macchine
Industrial Safety Fencing for pallet nailing and cutting lines that throw wood chips, broken nails, and other high-speed fragments into the work area.
When a plant uses conventional large-aperture mesh, the fence often has to sit far away from the machine to satisfy safety-distance rules. That eats floor space, blocks storage flow, and turns a valuable bay into a dead zone. MDFence solves that problem with a 20x100mm narrow-slot mesh that helps stop flying debris while supporting a tighter 120mm exclusion distance.
| Maglia di apertura | 20x100mm narrow-slot design |
|---|---|
| Primary risk controlled | Flying wood chips and broken nails from pallet machining |
| Safety-distance benefit | Supports a reduced 120mm dangerous-source distance |
| Space impact | Helps reclaim production and storage area that would otherwise be consumed by a wide safety buffer |
01
Stop the fragments that matter
Pallet processing is not a low-energy environment. Nailing heads, cut edges, splinters, and metal fasteners can travel fast enough to turn a normal open mesh into weak protection. The narrow 20x100mm layout is built to intercept that mixed debris stream instead of letting it pass through oversized gaps.
02
Shorter safe distance, tighter layout
The real cost of old guarding is not the fence itself. It is the empty ring around the machine. By passing fingertip-related protection checks and supporting a 120mm exclusion distance, MDFence lets teams place the barrier much closer to the risk source and keep aisles, carts, and inventory where they belong.
03
Use the same footprint for more output
Once the unsafe buffer shrinks, the layout gets cleaner. That means more usable floor for pallet staging, finished goods, in-process WIP, and maintenance access. For North American facilities under OSHA or local labor compliance pressure, this is the difference between a compliant cell and a compliant cell that still works like a production asset.
Dove Mdfence si adatta meglio
- Woodworking and pallet nailing cells where chips and broken nails need to be contained without wasting a large safety perimeter.
- Cutting and trimming zones that need closer guarding, better floor-space use, and a more efficient production layout.
Specification snapshot for planning
| Best-fit scenario | High-debris machine cells in woodworking and pallet production |
|---|---|
| Core structure | Precision narrow-slot industrial safety fencing |
| Planning priority | Combine compliance distance, fragment control, and footprint recovery in one layout |
Industrial Safety Fencing for tighter, safer woodworking cells
If your current guarding forces a wide dead zone around the machine, MDFence gives you a more compact path forward: narrow 20x100mm mesh, debris control for wood and metal fragments, and a layout that can shrink the exclusion footprint to 120mm where the application allows it.
