JA 
EN 
DE 
RU 
PT 
ES 
IT 機械防護
産業用周辺警備
In scrap shredding yards and auto dismantling lines, heavy metal fragments can eject at speed and forklifts can clip a weak fence during daily material handling. A light-duty barrier bends, cracks, or opens a gap, which means the hazard keeps moving past the boundary instead of stopping at it.
Specs that solve impact and containment at the same time
| Frame material | Q235炭素構造鋼 |
|---|---|
| 投稿サイズ | 60x60mm upright columns |
| 衝撃抵抗性 | Up to 1600 joules, TÜV certified |
| メッシュ開口部 | 20x100mm anti-entanglement micro mesh |
| Primary job | Stop flying debris, reduce pinch hazards, and hold the perimeter under repeated contact |
Why MDFence fits heavy-recycling and dismantling environments
01. Impact-rated structure for real site collisions
When a forklift brushes the boundary or a dense steel offcut is thrown into the guard line, the system needs more than a neat visual divider. MDFence uses a 60x60mm upright profile and a TÜV-tested 1600J impact rating, so the fence is built to absorb force instead of folding at the first strike. That makes it a practical perimeter for high-frequency, low-predictability industrial contact.
02. Micro mesh that blocks fragments without opening the field
The 20x100mm anti-entanglement mesh is not just about appearance. It helps contain smaller metal fragments that can be thrown by shredding or cutting operations, while also reducing the chance of hand access through the guard. That matters in dismantling zones where people, tools, and recycled metal all move inside the same footprint.
03. Perimeter guarding that stays useful after repeated use
MDFence is designed for industrial lines that do not stay still. The structure suits perimeter layouts around scrap processing, sorting, loading, and transfer points where equipment direction changes and the guard must still perform. Instead of treating the fence as a temporary barrier, it is built as a working protection system for long service life.
最適な用途
- Scrap shredding and metal recycling lines with flying fragment exposure.
- Auto dismantling workcells where forklifts, bins, and parts move close to the guard line.
- Any machine perimeter that needs both collision resistance and small-gap containment.
Request the layout and specification sheet
If you are defining a new guard line, start with the impact level, the mesh opening, and the collision risk at each access point. MDFence gives you a perimeter system that is already aligned to those checks.
Industrial Perimeter Guarding for high-risk production edges
If your site has heavy debris, fast-moving material handling, or repeated accidental contact, MDFence is the perimeter system built to keep that risk outside the work zone.
