PT 
EN 
DE 
RU 
JA 
ES 
IT 
Proteção de Máquinas
Proteção de Máquinas com Cercas de Segurança para Zonas de Alto Impacto
Safety Fencing Machine Guarding is built for scrap processing yards and vehicle dismantling lines where heavy debris, forklift contact, and flying metal fragments make light fencing fail fast.
Core Specs
| Material da armação | Aço estrutural de carbono Q235 |
| Tamanho do poste | 60x60mm upright post |
| Resistência ao impacto | 1600 J tested resistance |
| Design de malha | 20x100mm micro malha anti-emaranhamento |
| Primary risk covered | Heavy debris ejection and equipment collision |
Why It Fits This Job
1. Impact-ready structure for collision-prone lines
The 60x60mm Q235 steel post structure is the reason this system belongs beside scrap shredders and dismantling conveyors. When forklifts brush the boundary or metal pieces strike the guard, the frame is designed to absorb serious abuse instead of folding or splitting like light-duty fencing.
2. Micro mesh that blocks fragments without opening a hand hazard
The 20x100mm mesh keeps the barrier tight enough to stop flying metal chips and splinters from escaping the work zone. That matters in dense processing areas where fragment size, visibility, and reach-through risk all have to be controlled at the same time.
3. Built for scrap yards, auto dismantling, and high-contact boundaries
When the fence sits next to moving material handlers, the design problem is not visibility alone. It is keeping the perimeter intact after repeated bumps, vibration, and debris impact while still maintaining a clean safety boundary that operators can trust.
Typical Applications
- Scrap metal shredding and sorting areas with frequent projectile risk
- Automotive dismantling lines where forklifts and moving carts may hit the boundary
What the Design Solves
For high-impact work zones, the main failure mode is not only intrusion. It is fence deformation, broken panels, and uncontrolled debris release. This machine guarding solution addresses both problems together with structural steel strength and tight anti-flyout mesh geometry.
Need a Guarding Layout for Your Line?
Use Safety Fencing Machine Guarding when the boundary must survive collision, contain fragments, and keep the process area controlled without turning the fence into a weak point.
