{"id":28136,"date":"2026-06-18T14:09:56","date_gmt":"2026-06-18T06:09:56","guid":{"rendered":"https:\/\/safetyfencesystems.com\/?p=28136"},"modified":"2026-06-18T14:09:56","modified_gmt":"2026-06-18T06:09:56","slug":"protecao-de-maquinas-com-cercas-de-seguranca","status":"publish","type":"post","link":"https:\/\/safetyfencesystems.com\/pt\/protecao-de-maquinas-com-cercas-de-seguranca\/","title":{"rendered":"Prote\u00e7\u00e3o de m\u00e1quinas com cercas de seguran\u00e7a"},"content":{"rendered":"
\n
\n

Woodworking, pallet nailing, and cutting lines throw wood chips and broken nails into the aisle. When the mesh is too open, the fence has to sit far away from the machine, and that safety distance eats floor space fast.<\/p>\n

Prote\u00e7\u00e3o de m\u00e1quinas com cercas de seguran\u00e7a<\/p>\n

Safety fencing machine guarding<\/p>\n

Mdfence is designed for high-splash machine guarding in pallet processing and wood equipment zones. Its 20x100mm narrow-slot mesh helps block fast-moving wood debris and broken nails, while the anti-fingertip test supports a legal safety distance reduced to 120mm. That means more usable production and storage area, less wasted buffer space, and a cleaner compliance story for North American facilities.<\/p>\n

\"Prote\u00e7\u00e3o<\/p>\n

Solicite um or\u00e7amento<\/a><\/p>\n<\/section>\n

\n

Why the old approach wastes space<\/h2>\n
\n\n\n\n\n\n\n\n
Guarding issue<\/th>\nOpen mesh forces a larger offset around the machine.<\/td>\n<\/tr>\n
Typical hazard<\/th>\nWood chips, sawdust, and broken nails flying from nailing and cutting equipment.<\/td>\n<\/tr>\n
Mdfence mesh<\/th>\n20x100mm narrow-slot design for tighter particle interception.<\/td>\n<\/tr>\n
Dist\u00e2ncia de seguran\u00e7a<\/th>\n120mm after anti-fingertip testing, helping reduce dead zone footprint.<\/td>\n<\/tr>\n
Primary result<\/th>\nMore usable plant area for production, staging, and warehouse flow.<\/td>\n<\/tr>\n<\/tbody>\n<\/table><\/div>\n<\/section>\n
\n

Three reasons Mdfence fits wood processing environments<\/h2>\n
\n

01. Narrow-slot mesh for flying debris control<\/h3>\n

\"Prote\u00e7\u00e3o<\/p>\n

The 20x100mm aperture is sized for the reality of pallet nailing and cutting lines: small enough to intercept common debris paths without turning the guard zone into a wide, wasted perimeter.<\/p>\n<\/p><\/div>\n

\n

02. Tested to support a shorter legal offset<\/h3>\n

\"Prote\u00e7\u00e3o<\/p>\n

Anti-fingertip performance matters because it changes the layout. A smaller compliant distance gives engineers room to place the fence close to the hazard, instead of pushing it deep into valuable floor area.<\/p>\n<\/p><\/div>\n

\n

03. Better plant utilization for North American facilities<\/h3>\n

\"Prote\u00e7\u00e3o<\/p>\n

For a Reston plant or any similar North American site, the real benefit is not just protection. It is the reclaimed space for production lanes, packaging, pallet storage, and material movement.<\/p>\n<\/p><\/div>\n<\/section>\n

\n

Where this guarding setup makes the most sense<\/h2>\n