RU 
EN 
DE 
PT 
JA 
ES 
IT 
Customer demand analysis:
Need silk screen mesh 1000*2000mm, mesh 50*50mm, wire diameter 4.8mm, color: no requirement, total 200 square meters, i.e. 100 sheets.
Only want silk screen mesh, no need outer frame, customer figure out how to install. No surface treatment requirements. In addition to 50*50mm mesh size, the customer would like to ask whether there are other smaller mesh and wire diameter size.
The following picture is the picture of the wire mesh at the customer’s site, and it is impossible to tell whether the surface treatment and the specific size of the mesh have been carried out.
Technical program description
According to the customer’s requirements, after research, we provide two technical programs
- Customer demand size, no need for frame wire mesh mesh 1000 * 2000mm, grid 50 * 50mm, wire diameter 4.8mm, color: no requirements, a total of 100 pieces.
Supplier has similar size in stock, wire mesh 1000*2000mm, mesh 55*55mm, wire diameter 4.63. Quotation for surface treatment or not.
- Customize, keep the outer size of wire mesh 1000*2000mm unchanged, and reduce the size of mesh and wire diameter for customization. Quotation on whether or not to carry out surface treatment.
Confirmed two options for suppliers to quote.
| Stock（1000*2000mm，mesh55mm，wire diameter4.63mm） | Customized mesh and wire diameter sizes, outer dimensions remain1000*2000mm | |
| No surface treatment | 45 | 55 |
| cold galvanized surface | 50 | 60 |
The loading size is 2m*1m*0.5m, the total volume is 1 cubic meter, and the total weight is 920KG.
Interlock Switch Mounting Without Drilling: Why Alfence T-Slot Posts End Phantom Stops
Bolting an interlock switch bracket through a powder-coated steel post drills the coating, drops swarf into the cell and leaves a rust line — and when the hinged leaf sags, the tongue misaligns and the PLC reports a phantom guard fault. Alfence mounts sensors, e-stops and conduit in the T-slot groove of a 40×40 mm or 45×45 mm aluminum post, with door hardware sized to keep the safety switch aligned.
Phantom Safe Torque Off Stops: T-Slot Guarding Fence Posts Mount Interlocks Without Drilling
Painted steel guarding posts force maintenance to drill for interlock switches, dropping swarf in the cell and breaking the coating where rust starts. Sagging hinge doors then misalign the interlock tongue and the PLC trips Safe Torque Off while the gate is closed. Alfence industrial safety fence mounts sensors, e-stops and cable routing into the T-slot aluminum profile post without drilling, and uses hinged, folding or sliding door frames that keep interlock geometry stable - protecting OEE through phantom stops and line changes.
Automotive Plant Industrial Safety Fence: Keep the Robot Cell Close to the Hazard
Automotive plants cannot afford to lose production floor to an oversized machine guarding perimeter. Alfence combines 20×100 mm mesh with slim 40×40 mm or 45×45 mm aluminum posts for a compact, reconfigurable industrial safety fence layout, with final clearance confirmed by the project risk assessment.
