EN 
DE 
RU 
PT 
JA 
ES 
IT 
factory Splash-proof fence
Factories can be noisy, messy, and potentially hazardous places to work. One common safety concern is the possibility of water or other liquids splashing out of machinery or processes and injuring workers. To prevent this from happening, many factories install splash-proof fences around areas where liquids are present.
A splash-proof fence is a type of barrier that is designed to prevent liquids from escaping a specific area. These fences are typically made from materials that are resistant to corrosion and are able to withstand exposure to various chemicals and other substances commonly found in factories. They are usually made from stainless steel, aluminum, or a combination of both.
The design of a splash-proof fence will depend on the specific needs of the factory. Some fences are simple and consist of a solid panel that extends up from the floor to a height of several feet. This type of fence is effective at preventing liquids from splashing out of a specific area, but it may not provide adequate protection if the liquid is being sprayed or splashed from a height.
Other splash-proof fences are designed to be more versatile. These fences may consist of a series of panels that can be adjusted to different heights and angles. This allows workers to customize the fence to suit their specific needs, ensuring that liquids are contained and workers are protected.
In addition to preventing liquid splashes, splash-proof fences can also be used to reduce noise levels in the factory. Many factories produce a lot of noise, which can be harmful to workers’ hearing over time. By installing a splash-proof fence around noisy machinery, workers can be protected from both liquid splashes and excessive noise levels.
Interlock Switch Mounting Without Drilling: Why Alfence T-Slot Posts End Phantom Stops
Bolting an interlock switch bracket through a powder-coated steel post drills the coating, drops swarf into the cell and leaves a rust line — and when the hinged leaf sags, the tongue misaligns and the PLC reports a phantom guard fault. Alfence mounts sensors, e-stops and conduit in the T-slot groove of a 40×40 mm or 45×45 mm aluminum post, with door hardware sized to keep the safety switch aligned.
Phantom Safe Torque Off Stops: T-Slot Guarding Fence Posts Mount Interlocks Without Drilling
Painted steel guarding posts force maintenance to drill for interlock switches, dropping swarf in the cell and breaking the coating where rust starts. Sagging hinge doors then misalign the interlock tongue and the PLC trips Safe Torque Off while the gate is closed. Alfence industrial safety fence mounts sensors, e-stops and cable routing into the T-slot aluminum profile post without drilling, and uses hinged, folding or sliding door frames that keep interlock geometry stable - protecting OEE through phantom stops and line changes.
Automotive Plant Industrial Safety Fence: Keep the Robot Cell Close to the Hazard
Automotive plants cannot afford to lose production floor to an oversized machine guarding perimeter. Alfence combines 20×100 mm mesh with slim 40×40 mm or 45×45 mm aluminum posts for a compact, reconfigurable industrial safety fence layout, with final clearance confirmed by the project risk assessment.
