EN 
DE 
RU 
PT 
JA 
ES 
IT Global Machine Exports · Multi-Market Compliance
Safety Guarding System for Global Machine Exports: One CE-Ready Design Across 40+ Markets
A machine tool builder shipping to 40+ countries meets four compliance regimes at once — EU CE (Machinery Directive 2006/42/EC, replaced by (EU) 2023/1230 from 2027-01-20), US OSHA/ANSI, and China GB. Re-engineering and re-certifying a guarding line for every market multiplies cost and delay. Alfence answers with one aluminum modular spec and a reusable compliance package.
One Specification, Four Standards
A multinational machine tool maker cannot run a different fence for every country. The same perimeter guarding must clear the EU CE machinery regime, US OSHA and ANSI/RIA R15.06, and China GB — without a fresh engineering cycle each time. Alfence is designed once, to the harmonized EN ISO 14120 and EN ISO 13857 baselines, so one bill of materials serves export units worldwide.
| Market | Baseline Alfence meets with one spec |
|---|---|
| European Union | CE marking under Machinery Directive 2006/42/EC; from 2027-01-20 the updated (EU) 2023/1230. Guarding to EN ISO 14120, safety distance to EN ISO 13857 (120 mm). |
| United States | OSHA 29 CFR 1910.212 general guarding + ANSI/RIA R15.06 robot cell rules; EN ISO 14120-aligned aluminum design. |
| China | GB machinery safety guarding requirements; same corrosion-resistant aluminum modular spec. |
| Global export units | Single Alfence specification plus a reusable risk-assessment and declaration format. |
Why Alfence Carries One Design Across Markets
Built to EN ISO 14120 and EN ISO 13857
Alfence modular safety fence uses 40×40 mm and 45×45 mm T-slot aluminum posts, a 20×100 mm welded wire mesh grid, and heights of 1000/1800/2000 mm with widths from 200–1200 mm. The 20×100 mesh lets the fence sit close to the hazard (about 120 mm), satisfying the EN ISO 13857 safety-distance rule. Because the geometry is fixed and documented, the same machine guarding layout is repeatable plant to plant.
Reusable CE and Machinery Directive documentation
Alfence ships a reusable CE / Machinery Directive compliance file and a standardized risk-assessment format. Instead of rewriting the declaration for every destination, an exporter reuses one validated package, attaches the local sign-off, and moves on. That cuts the repeated certification cost that normally hits each new market.
Relocatable, bolt-free, reusable across sites
The aluminum extrusion (480 ℃, ~3000 t) with powder coating cured at 185 ℃ for 15 minutes is corrosion resistant — meeting the EN ISO 14120 material requirement for guarded environments. Bolt-free assembly and removable panels mean a guarding line commissioned in one country can be relocated or reconfigured in another without welding, so the same assets serve multiple regional bases.
Where Global Builders Deploy One Alfence Spec
- Robot cell guarding for multinational automation lines
- CNC machine guarding and machine tool guarding in export plants
- Automated warehouse guarding and AGV path guarding
- Cleanroom guarding and assembly line separation
Because the specification is identical everywhere, a safety manager in one region can audit a sister plant in another using the same drawings, the same mesh grid, and the same compliance file — no translation of a one-off local design.
Reusable Compliance Package
Alfence provides the EN ISO 14120 / EN ISO 13857 design evidence, the reusable CE / Machinery Directive documentation, and the risk-assessment template so your export, EHS, and engineering teams work from one source. Send us your target markets and we return a single guarding specification with the matching declaration format.
Standardize Your Global Guarding Spec
Stop re-certifying a new fence for every country. One Alfence safety guarding system, one CE-ready design, four standards cleared. Talk to our application team about your 40+ market rollout.
