EN 
DE 
RU 
PT 
JA 
ES 
IT Guarding fence
Guarding fence for heavy scrap flyout and forklift collision risk
In scrap shredding, metal recycling, and vehicle dismantling lines, the real hazard is not just the machine itself. Heavy fragments can fly out, and forklifts or handlers can strike the perimeter. Mdfence guarding fence is built for that environment with Q235 carbon structural steel, 60x60mm posts, TÜV safety certification, 1600 joules of impact resistance, and 20x100mm anti-entrapment micro mesh.
Guarding fence specifications that match high-impact scrap zones
Light fencing fails in recycling and dismantling plants because the problem is not cosmetic damage. Once a panel bends or a joint opens, flying fragments, vehicle contact, and hand access all become uncontrolled. Mdfence guarding fence addresses those failure modes with a structural steel frame, a collision-rated post system, and micro mesh that keeps the perimeter closed under real industrial abuse.
| Risk or requirement | Mdfence response |
|---|---|
| Heavy scrap flyout | 20x100mm micro mesh helps block metal fragments from escaping the guarded zone. |
| Forklift and handler contact | Q235 carbon structural steel frame with 60x60mm posts is designed for high-impact collision control. |
| Repeated impact exposure | TÜV safety certification and a 1600 joule impact rating support use in high-traffic industrial lines. |
| Hand and finger access | Fine opening micro mesh reduces pinch-point exposure around active machine areas. |
| Long perimeter guarding | Modular fence panels can be deployed around sorting, dismantling, and transfer corridors. |
Why this guarding fence fits scrap and dismantling work
Collision-rated structure
The first failure point in a scrap yard is usually the frame, not the mesh. This is why the guarding fence uses 60x60mm posts and a Q235 carbon structural steel body. The structure is specified to handle 1600 joules of impact energy, which gives you a practical buffer against accidental forklift bumps and moving metal loads.
Micro mesh for flyout containment
Scrap processing creates sharp fragments and unpredictable trajectories. The 20x100mm anti-entrapment micro mesh is the key difference between a basic barrier and a guarding fence that actually contains flyout. It helps reduce the chance that broken metal pieces leave the work cell and injure nearby operators.
Continuous perimeter protection
The right fence for a recycling line must follow the line, not fight it. Modular guarding fence panels make it easier to close off conveyors, transfer points, and dismantling cells without leaving weak corners open. The result is a cleaner perimeter with fewer access gaps and less risk at the edge of the process line.
Where guarding fence performs best
- Scrap shredding and crushing lines with flying debris risk
- Auto dismantling bays with heavy part handling and tool impact
- Forklift routes that cross close to machine perimeters
- Transfer and sorting corridors with frequent material drop-off
- High-risk work cells that need a closed, visible perimeter
In these spaces, guarding fence is not a visual accessory. It is a physical containment layer that separates people from impact zones, blocks fragment escape, and keeps the working perimeter intact when the line is under pressure.
What to confirm before specifying a guarding fence
Check the impact direction, fragment trajectory, vehicle traffic path, access point locations, and required opening size. Then match the system to the job with the right post section, mesh opening, and anchoring detail. For heavy scrap operations, Mdfence already answers those requirements with 1600 joules of impact resistance, 60x60mm posts, Q235 structural steel, and 20x100mm micro mesh.
Need a guarding fence for a scrap-heavy line?
Send the site layout, machine type, and vehicle route. We will map the perimeter and recommend a guarding fence configuration that fits the collision risk, the fragment risk, and the access pattern of your line.
